HomeStar Bill of LadingHow Do I....Change to manually keying in the BOL#

7.7. Change to manually keying in the BOL#

To change the system so that you have to manually enter the BOL#'s just perform the following.

From the Main screen, click on the Setup Menu, then System/Shipper Setup Properties, or just press F4.

On this screen, select the Shipper to change the settings, then click on the field that states - Modifiable BOL#.  This should place a check mark in the box. 

Then Close this screen, and exit the program. 

Re-start the program and the change will cause you to enter the BOL# on each BOL you create from then on.


This page was: Helpful | Not Helpful